Matrix user forums

Posted: **Tue Jan 14, 2014 6:20 pm**

Hi I have this issue with Flowcode 5.

Since today it refuses to compile any code.
I tried some old programs that compiled ok. which I never modified. And even those can not be compiled.
I get the following error message:

Launching the compiler...
C:\Program Files (x86)\Flowcode\v5\Tools\boostc\boostc_pic16_flowcode.exe -v -t PIC16F1825 "Camping Light1825h.c"
BoostC Optimizing C Compiler Version 7.04 (for PIC16 architecture)
http://www.sourceboost.com
Copyright(C) 2004-2011 Pavel Baranov
Copyright(C) 2004-2011 David Hobday

Compiler can not be started without a host program (code 120)

Return code = 120
Flowcode was unable to compile the flowchart's C code due to the following errors:

If your flowchart contains C code, please review this carefully. If your flowchart contains no C-code or you have thoroughly reviewed the code, contact Technical Support.

FINISHED

What should I do to get it working again?

Best Regards:
Uli

Posted: **Tue Jan 14, 2014 9:14 pm**

Try looking here:
http://www.matrixmultimedia.com/mmforum ... 120#p42001

Posted: **Tue Jan 14, 2014 11:45 pm**

Hi
Thanks for the reply.
I just wonder why I did not find this thread when I was searching for error 120.
I already rebooted my Mac and it did not help.
I realised with an Apple computer using parallels a reboot of the computer does not reboot Windows.
After rebooting Windows alone instead of rebooting the computer it worked.
Best Regards:
Uli

Matrix user forums

Flowcode 5 failing to compile any code.

Flowcode 5 failing to compile any code.

Re: Flowcode 5 failing to compile any code.

Re: Flowcode 5 failing to compile any code.