Page 1 of 1
KS0108 64 x 128 graphical LCD component
Posted: Wed Mar 07, 2012 3:26 pm
by dazz
Can this be added as a component, ive tried using the beta component but im too thick to use it
Re: KS0108 64 x 128 graphical LCD component
Posted: Wed Mar 07, 2012 10:52 pm
by DavidA
Hey dazz,
Hopefully in the near future we will be making component creation a lot easier so this may become a possibilty soon!
I might be wrong but i think that component was designed back for Flowcode v3 so there may very well be some issues there!
Re: KS0108 64 x 128 graphical LCD component
Posted: Wed Mar 07, 2012 11:26 pm
by dazz
cheers
Re: KS0108 64 x 128 graphical LCD component
Posted: Thu Oct 04, 2012 2:45 pm
by Mikat
The ks108 component works on the Flowcode4 fine, so it might work at the ver5 , at least my ssd1289 component, which is written at ver4 works straight at ver5..
Unfortunately I don't have the hardware to test at dspic, and I don't have the software to test at 8bit pic, which I have the hardware
...
Mika
Re: KS0108 64 x 128 graphical LCD component
Posted: Fri Oct 05, 2012 9:57 pm
by dazz
cheers mikat
thats on a backburner atm, i think it was jordy who did a very good post recently on using the component and i started to check it out but other stuff got in the way
Regards
Dazz
Re: KS0108 64 x 128 graphical LCD component
Posted: Thu Oct 18, 2012 12:41 pm
by Mikat
Hi.
I can now confirm that the custom component at the ks108 works ok with Flowcde 5 (8 bit), just tested it on hardware..
Mika