Hello .
I Know this has to be in FLOWCODE 5 but i Can't post there .
In Flowcode V5.5 Atmega2560 or Arduino2560 ADC's ON PORT K (ANA8 to ANA15 ) Do Not work
when I read the ADC it always Returns 0 .
I have try to look at the FCD file but cant find nothing .
Thanks
Atmega2560 Port K ADC's not working Bug ?
Moderator: Benj
-
- Matrix Staff
- Posts: 9520
- Joined: Sat May 05, 2007 2:27 pm
- Location: Northamptonshire, UK
- Has thanked: 2585 times
- Been thanked: 3815 times
- Contact:
Re: BUG Atmega2560 Port K ADC's NOT WORKING
Hi Alan_37,
I have moved topic here since you can't post about Flowcode V5 in the V6 section.
What version of Flowcode have you got, e.g student, professional, free etc?
I have moved topic here since you can't post about Flowcode V5 in the V6 section.
What version of Flowcode have you got, e.g student, professional, free etc?
Martin
- Alan_37
- Posts: 179
- Joined: Sun May 01, 2016 8:36 pm
- Has thanked: 51 times
- Been thanked: 54 times
- Contact:
Re: Atmega2560 Port K ADC's not working Bug ?
Hi Medelec
Just managed to use the ADC's on Port F instead of K only thing is I had to disable JTAG from Fuses
as it was pulling up PF4,5,6,7 to 3.3v
hope you can find what is wrong with Port K
Thanks
Just managed to use the ADC's on Port F instead of K only thing is I had to disable JTAG from Fuses
as it was pulling up PF4,5,6,7 to 3.3v
hope you can find what is wrong with Port K
Thanks