FlowCode v3
- goldwingers
- Posts: 118
- Joined: Wed Sep 06, 2006 1:22 pm
- Location: London
- Been thanked: 1 time
- Contact:
phew
You guys are so clever, but lets not forget the basics...... lets have a set of switches that are normally closed, like in alarm circuits, or an option to change the state before running a flowcode sim,
What I have in mind is Something like 240 x 128 pixels and 128 x 64
I think it’s something quite standard , easy to find , and are used in many projects .
Do you think it is possible to include them in v3 ?
http://www.sure-electronics.net/english ... 128x64.pdf
Alan.
I think it’s something quite standard , easy to find , and are used in many projects .
Do you think it is possible to include them in v3 ?
http://www.sure-electronics.net/english ... 128x64.pdf
Alan.
Last edited by ALAN_26 on Thu Oct 19, 2006 10:05 am, edited 2 times in total.
- Steve
- Matrix Staff
- Posts: 3424
- Joined: Tue Jan 03, 2006 3:59 pm
- Has thanked: 114 times
- Been thanked: 422 times
- Contact:
Possibly, but not immediately - we've got quite a few other commitments to get through first.
Component creation is currently not very easy (I'll soon work on a way of making it easier by producing a good SDK).
If you (or anyone else) has example C code for driving such a display, it would cut down the time to create a component considerably.
Component creation is currently not very easy (I'll soon work on a way of making it easier by producing a good SDK).
If you (or anyone else) has example C code for driving such a display, it would cut down the time to create a component considerably.
-
- Posts: 14
- Joined: Sat Nov 04, 2006 2:38 pm
- Contact:
Buying Flowcode 3
Flowcode 3 will be ready for purchase in a week or so we hope. The upgrade policy and prices can be seen in the datasheet at:
http://www.matrixmultimedia.com/datashe ... C-60-3.pdf
Any further sales questions can be addressed to:
jayne@matrixmutimedia.co.uk
Thanks for your patience.
John
http://www.matrixmultimedia.com/datashe ... C-60-3.pdf
Any further sales questions can be addressed to:
jayne@matrixmutimedia.co.uk
Thanks for your patience.
John
Hi,
I think the address is wrong, you say it is...
jayne@matrixmutimedia.co.uk
This bounces back, I think it should be
jayne@matrixmultimedia.co.uk
( missing L in multimedia )
Jerry
I think the address is wrong, you say it is...
jayne@matrixmutimedia.co.uk
This bounces back, I think it should be
jayne@matrixmultimedia.co.uk
( missing L in multimedia )
Jerry
- Steve
- Matrix Staff
- Posts: 3424
- Joined: Tue Jan 03, 2006 3:59 pm
- Has thanked: 114 times
- Been thanked: 422 times
- Contact:
Hello ALAN_26,
Yes, it is a bit difficult to buy it on our website! I've had a word with a colleague who will hopefully make it easier.
To buy Flowcode v3, look here:
http://www.matrixmultimedia.com/product ... ersion%203
The upgrade policy and pricing is on page 8 of the datasheet:
http://www.matrixmultimedia.com/datashe ... C-60-3.pdf
It says the following:
jayne@matrixmultimedia.co.uk
Yes, it is a bit difficult to buy it on our website! I've had a word with a colleague who will hopefully make it easier.
To buy Flowcode v3, look here:
http://www.matrixmultimedia.com/product ... ersion%203
The upgrade policy and pricing is on page 8 of the datasheet:
http://www.matrixmultimedia.com/datashe ... C-60-3.pdf
It says the following:
So, please contact Jayne with your request:Upgrading licences
Upgrades from one type of licence to another are simply the price difference.
Version 2 to Version 3 upgrade
Upgrades from version 2 to version 3 will be charged at 50% of the version 3 price.
Version 1 to Version 3 upgrade
Upgrades from version 1 to version 3 will be charged at 65% of the version 3 price.
Upgrade procedure
Please contact Matrix Multimedia or one of our dealers with your old serial number which is found on the inside of your CD ROM case.
jayne@matrixmultimedia.co.uk
Free upgrade?
Can I assume that since I purchased my Pro version in mid-September, I will recieve a free upgrade to V3? What do I need to do to make that happen?
rvogel
-
- Flowcode v5 User
- Posts: 273
- Joined: Thu Apr 17, 2008 9:59 am
- Has thanked: 19 times
- Been thanked: 16 times
- Contact:
Re:
Hi Steve,
Can you tell me what the status is of the possible implementation of a macro for RC5/RC6 IR remote control? At one time it seemed you found it interesting but I can't find anything about it on the forum. I have a need to implement soimple one-way commands through RC5 (philips) codes.
PS Does anybody else here have some info or experience in this?
TIA,
Jan Didden
Can you tell me what the status is of the possible implementation of a macro for RC5/RC6 IR remote control? At one time it seemed you found it interesting but I can't find anything about it on the forum. I have a need to implement soimple one-way commands through RC5 (philips) codes.
PS Does anybody else here have some info or experience in this?
TIA,
Jan Didden
steve wrote:Hi James,
We are always interested in new ideas for components and we do develop new components from time to time. It is a question of finding the time to do them.
Please email the code to me and I will have a quick look at it with a view to driving it from FlowCode. If it looks easy to incorporate, I'll see what I can do. If not, I'll try to give you some pointers to enable you to get started on this. Either way, we could end up with some kind of remote-control component for FlowCode, which will benefit all of our users and (as you say) be more "real-world".
As an aside, our IrDA E-Block is good for IrDA work and you can use it for more simple Ir communications. But it is a bit overpriced if all it is used for is Ir (because it has 2 chips dedicated to IrDA communication that will be essentially redundant). We do intend to make a new Ir-only E-Block in the next few months - but again, this depends on finding the time...
- Steve
- Matrix Staff
- Posts: 3424
- Joined: Tue Jan 03, 2006 3:59 pm
- Has thanked: 114 times
- Been thanked: 422 times
- Contact:
Re: FlowCode v3
Hi Jan,
I always find things like this interesting! But like I said, finding the time to do everything is impossible.
We have no plans to implement the RC5 remote control protocol, but we will support you as best we can if you decide to implement this yourself.
I always find things like this interesting! But like I said, finding the time to do everything is impossible.
We have no plans to implement the RC5 remote control protocol, but we will support you as best we can if you decide to implement this yourself.
-
- Flowcode v5 User
- Posts: 273
- Joined: Thu Apr 17, 2008 9:59 am
- Has thanked: 19 times
- Been thanked: 16 times
- Contact:
Re: FlowCode v3
OK, I have it implemented in asm for a 4MHz clock, so it should be possible to make it a stand-alone component. However, it uses TMR0 so there is probably some complication. I'll see how far I get, maybe I'll take you up on this
Jan Didden
Jan Didden