Page 3 of 3

Re: Microcontroller Systems Engineering with Flowcode

Posted: Fri Aug 15, 2014 11:39 pm
by jkunzmann3251
Help…Unable to find comprehensive information on how to implement Look Up Table in Version 5. I do know about the Supplemental Code window via Build Menu and Project Options. Nevertheless, there is no information about what goes into Definitions and or the Implementation window. There were references on the forum with links, but the links are not working. I would appreciate a simple example for reference and appropriate syntax. Greatly appreciated in advance!!! Joe K

Re: Microcontroller Systems Engineering with Flowcode

Posted: Fri Aug 15, 2014 11:53 pm
by medelec35
Hi Joe,
Here are a couple of links to LUT tutorials:
http://www.matrixtsl.com/mmforums/viewt ... 26&t=10066
&
http://www.matrixtsl.com/mmforums/viewt ... 69&p=35960

For more links, just enter LUT in the search window.

Martin

Re: Microcontroller Systems Engineering with Flowcode

Posted: Sat Aug 16, 2014 3:04 pm
by dazz
jkunzmann3251 wrote:Help…Unable to find comprehensive information on how to implement Look Up Table in Version 5. I do know about the Supplemental Code window via Build Menu and Project Options. Nevertheless, there is no information about what goes into Definitions and or the Implementation window. There were references on the forum with links, but the links are not working. I would appreciate a simple example for reference and appropriate syntax. Greatly appreciated in advance!!! Joe K
Hi
As you are using V5 can you follow the link in my sig and sign up for the V5 forums, as this is in the v2 forums

Regards
Dazz