Hello Flowcode staff,
Someone helped me by uploading his project file CCP_P12__REV1.zip to this forum:
http://www.matrixtsl.com/mmforums/viewt ... =7&t=15567 )
I'm trying to open it using a demo version of Flowcode 6, but I'm getting this messasge in a pop-up window:
"Failed to open document.
Attribute <array> is not found."
Then the project just started loading shuts down leaving blank working space.
Any advise please?
Thanks,
Victor
MMC
What does this error mean?
Moderator: Benj
-
- Posts: 9
- Joined: Mon Dec 23, 2013 4:23 am
- Been thanked: 1 time
- Contact:
-
- Matrix Staff
- Posts: 9520
- Joined: Sat May 05, 2007 2:27 pm
- Location: Northamptonshire, UK
- Has thanked: 2585 times
- Been thanked: 3815 times
- Contact:
Re: What does this error mean?
Hi Victor,
You will probably require a flowcode update to the latest version.
That error usually means that you're trying to open a flowchart that was created with a later version than you currently have.
E.g if you have a version 6.04 and try to open a flowchart that was created with V6.1.0.0 (latest version at the time of posting) then you will get error.
Martin
You will probably require a flowcode update to the latest version.
That error usually means that you're trying to open a flowchart that was created with a later version than you currently have.
E.g if you have a version 6.04 and try to open a flowchart that was created with V6.1.0.0 (latest version at the time of posting) then you will get
Code: Select all
Attribute <array> is not found
Martin
Martin