Hi to all
I have made a flowchart using the 4 segment LED display and I can get this circuit to work, however, when I use the single LED display x 2, I cannot get the temp reading to display properly. The switching between the two segments seems to have a problem when using the single display?
Where am I going wrong??
Please help...!!
Regards
Ted
2 Digit 7 segment display thermometer
Moderator: Benj
-
- Posts: 79
- Joined: Sat Mar 14, 2015 7:52 am
- Has thanked: 46 times
- Been thanked: 26 times
- Contact:
2 Digit 7 segment display thermometer
- Attachments
-
- LED Thermometer LM35DZ 2 digits.fcfx
- (8.49 KiB) Downloaded 315 times
- Benj
- Matrix Staff
- Posts: 15312
- Joined: Mon Oct 16, 2006 10:48 am
- Location: Matrix TS Ltd
- Has thanked: 4803 times
- Been thanked: 4314 times
- Contact:
Re: 2 Digit 7 segment display thermometer
Hi Ted,
When using the single components you need to remember to clear the active digit before showing the next digit.
When using the single components you need to remember to clear the active digit before showing the next digit.
Regards Ben Rowland - MatrixTSL
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
-
- Posts: 79
- Joined: Sat Mar 14, 2015 7:52 am
- Has thanked: 46 times
- Been thanked: 26 times
- Contact:
Re: 2 Digit 7 segment display thermometer
Thanks for your help Ben, that was one thing that I did not try!!
Much appreciated
Much appreciated