Hello again
If I pick 18F47J53 in the target list, Flowcode report me that the corresponding FCD file is missing or corrupted. Same story with the 18F46J53 MCU.
Do I have a problem with my installation or is it the same for everyone ?
Thank you
<LINK REMOVED>
help me!!!!
Moderator: Benj
-
- Matrix Staff
- Posts: 9520
- Joined: Sat May 05, 2007 2:27 pm
- Location: Northamptonshire, UK
- Has thanked: 2585 times
- Been thanked: 3815 times
- Contact:
Re: help me!!!!
Hi petertohen,
I have tried with the latest FC6 = 6.1.4.0 & 6.1.3.2 and both versions open 18F46J53 & 18F47J53.
If you have the latest version You can try the Repair or Modify option depending on what version of windows you are running.
Martin
No not the same for me: What is your current FC6 version?petertohen wrote:Do I have a problem with my installation or is it the same for everyone ?
I have tried with the latest FC6 = 6.1.4.0 & 6.1.3.2 and both versions open 18F46J53 & 18F47J53.
If you have the latest version You can try the Repair or Modify option depending on what version of windows you are running.
Martin
Martin