24FV32KA301 (ANALOG INPUTS **SOLVED**)
Posted: Fri Jan 19, 2018 6:39 pm
Hi Ben/Leigh,
Need your help in solving the below problem with analog inputs.
I have An1, An3 and An4 enabled at 12bit resolution. The simulation is working but the code when loaded into the PIC works only for An4 the other two are reading ZERO irrespective of whatever input you feed to them. Attaching herewith the file.
Thanks in advance.
RTJ Nair
Need your help in solving the below problem with analog inputs.
I have An1, An3 and An4 enabled at 12bit resolution. The simulation is working but the code when loaded into the PIC works only for An4 the other two are reading ZERO irrespective of whatever input you feed to them. Attaching herewith the file.
Thanks in advance.
RTJ Nair