EDIT THE COMPONENT KEYPAD

For Flowcode users to discuss projects, flowcharts, and any other issues related to Flowcode 6.

Moderator: Benj

Genilsonsa
Posts: 150
Joined: Mon Oct 15, 2012 5:19 pm
Has thanked: 12 times
Been thanked: 18 times
Contact:

EDIT THE COMPONENT KEYPAD

Postby Genilsonsa » Sat Jun 30, 2018 5:03 am

Hello all welcome .I would like to know if i edit the component Keypad to change the logic of the PullDown for Pullup.If it is not possible to make directly in the component .Thanks to all
Attachments
Capturar.PNG
Capturar.PNG (173.48 KiB) Viewed 1007 times

User avatar
Benj
Matrix Staff
Posts: 14670
Joined: Mon Oct 16, 2006 10:48 am
Location: Matrix TS Ltd
Has thanked: 4655 times
Been thanked: 4273 times
Contact:

Re: EDIT THE COMPONENT KEYPAD

Postby Benj » Mon Jul 02, 2018 3:15 pm

Hello,

This is not currently supported by the component. We can look to add it to the latest version but it's unlikely we will add the functionality for Flowcode 6.

You could always create your own macro routine for scanning for key presses to allow for the inverted polarity. You could also use an inverted buffer IC to flip the signals going back to the microcontroller.
These users thanked the author Benj for the post:
Genilsonsa (Mon Jul 02, 2018 9:16 pm)
Rating: 5%
 

Genilsonsa
Posts: 150
Joined: Mon Oct 15, 2012 5:19 pm
Has thanked: 12 times
Been thanked: 18 times
Contact:

Re: EDIT THE COMPONENT KEYPAD

Postby Genilsonsa » Mon Jul 02, 2018 9:15 pm

Hello Benj thank you for answer me.In that case I create a macro to make a positive sweep.