Hi Sir,
I am getting below error while compiling. Seems it is related to quad seven segment LED display. Kindly assist how to solve this issue.
"Serious Warning: Possible sw stack corruption, function 'FCD_0fca1_led_7seg_quad1__ShowDigit' called by more than one asynchronous thread (main/Task, interrupt, interrupt low)"
Getting while compiling
Moderator: Benj
-
- Valued Contributor
- Posts: 1191
- Joined: Wed May 31, 2017 11:57 am
- Has thanked: 70 times
- Been thanked: 440 times
- Contact:
Re: Getting while compiling
Hi Juzar,
Can you post your code - sounds like you are calling a display routine from within an interrupt handler - which is a mistake.
Martin
Can you post your code - sounds like you are calling a display routine from within an interrupt handler - which is a mistake.
Martin
-
- Posts: 53
- Joined: Wed Feb 25, 2015 1:31 pm
- Has thanked: 15 times
- Been thanked: 4 times
- Contact:
Re: Getting while compiling
Hi Martin
Yes, you are correct, your hint did help me to eliminate the error. I was calling display routing within interrupt handler. After correcting the software there is no compiling error.
Thanks
Yes, you are correct, your hint did help me to eliminate the error. I was calling display routing within interrupt handler. After correcting the software there is no compiling error.
Thanks