Happy New Year!
would be fine for a directly support with icon's
txs
best wishes
rudi
MCP23S17 SPI MCP23017 I²C
Moderator: Benj
Forum rules
Only feature requests will be considered here. General questions should not be posted in this forum.
Only feature requests will be considered here. General questions should not be posted in this forum.
Re: MCP23S17 SPI MCP23017 I²C
hi
after you add SPI_MASTER Icon
be sure, that you change setup follow:
( Standard )
Clock Phase = Leading Edge
change it to
Clock Phase = Trailing Edge
now it run like a charme for me
solved and done.
will update user components with MCP23S17 ICON / flowchart for test and play
Best wishes
rudi
after you add SPI_MASTER Icon
be sure, that you change setup follow:
( Standard )
Clock Phase = Leading Edge
change it to
Clock Phase = Trailing Edge
now it run like a charme for me
solved and done.
will update user components with MCP23S17 ICON / flowchart for test and play
Best wishes
rudi
Last edited by Rudi on Mon Jan 05, 2015 2:07 pm, edited 1 time in total.
Re: MCP23S17 SPI MCP23017 I²C
MCP23S17 SPI
~~~~~~~~~~~
base is attached -
for your mcu change in projekt your mcu
controll spi pins
you can play, change with it - have fun
best wishes
rudi
EDIT:
one little mistake
the
IOCON.HAEN must be 0x08
i have wrote in code 0x04
will update next time here
~~~~~~~~~~~
base is attached -
for your mcu change in projekt your mcu
controll spi pins
you can play, change with it - have fun
best wishes
rudi
EDIT:
one little mistake
the
IOCON.HAEN must be 0x08
i have wrote in code 0x04
will update next time here