ACS7xx - Current Sensor "Simulatable"
Posted: Fri Aug 30, 2013 11:23 pm
ACS7xx - Current Sensor "Version: 1.1
This component is a follow-up of a component that has been recently been released:: http://www.matrixmultimedia.com/mmforum ... 58&t=12745
This updated component futures three devices in one component. The devices that can be selected are:
- ACS712 with a current range of +/- 5A
- ACS756 with a current range of +/- 50A
- ACS761 with a current range of +/- 20A <<< this current sensor is a bit special because its hot-swappable and has some status pin like to signal fault conditions.
For the ACS761these fault conditions and other signals need to be implemented this will be done in a future release of this component.
Component Use:
The component can be used by copying the ".fcpx" file into the component directory of Flowcode v6.
Then component can be found under the tap inputs as ACS7xx.
Future Updates:
Future updates will include:
- the use of the status pins of the ACS761 current sensor
- Other current ranges will be implemented
- ACS758 | +/- 200A
- ACS710 | +/- 75A <<< With overcurrent status pin and reset.
If you have any suggestion for this component please let me know.
Download:
This component is a follow-up of a component that has been recently been released:: http://www.matrixmultimedia.com/mmforum ... 58&t=12745
This updated component futures three devices in one component. The devices that can be selected are:
- ACS712 with a current range of +/- 5A
- ACS756 with a current range of +/- 50A
- ACS761 with a current range of +/- 20A <<< this current sensor is a bit special because its hot-swappable and has some status pin like to signal fault conditions.
For the ACS761these fault conditions and other signals need to be implemented this will be done in a future release of this component.
Component Use:
The component can be used by copying the ".fcpx" file into the component directory of Flowcode v6.
Then component can be found under the tap inputs as ACS7xx.
Future Updates:
Future updates will include:
- the use of the status pins of the ACS761 current sensor
- Other current ranges will be implemented
- ACS758 | +/- 200A
- ACS710 | +/- 75A <<< With overcurrent status pin and reset.
If you have any suggestion for this component please let me know.
Download: