problem ebm001

A forum where Flowcode v6 user created components can be shared, discussed and reviewed.

Moderator: Benj

lorenzo
Flowcode V4 User
Posts: 4
Joined: Thu Jun 30, 2011 10:09 pm
Contact:

problem ebm001

Postby lorenzo » Wed Jan 28, 2015 1:31 pm

Hello Benj as per your request, I am attaching the file matrixprog.fcfx of Flowcode 6 concerning ebm001.
I remind you that the problems are in the slow pace of implementation of graphics and written, in simulation and fast.
Beny doing the same with eb075 Empowerment Website Project with Flowcode 6 there are these problems: the font byte 0 is displayed while the byte 1,2,3 in the simulation is not displayed on mentren GLCD is only displayed only 0,1,2
Benj macro setdisplayorientation in simulation is performed while in gLCDeb075 not performed.
Attachments
MATRIXPROG.fcfx
(14.53 KiB) Downloaded 111 times

User avatar
Benj
Matrix Staff
Posts: 14130
Joined: Mon Oct 16, 2006 10:48 am
Location: Matrix TS Ltd
Has thanked: 4325 times
Been thanked: 4070 times
Contact:

Re: problem ebm001

Postby Benj » Wed Jan 28, 2015 6:37 pm

Hello,

The EBM001 can be quite slow on some devices but it depends on the speed of your microcontroller as to how fast it can clock out the pixel data to the display. An ECIO40 is quite fast and a ECIO40P16 is very fast.

The 4D displays work in a completely different way then our standard bit banged gLCD and so the font size and display orientation will not work with these. The good news is that the VISI component allows you to design a front end using the 4D systems tool and then control the interface using the Flowcode VISI component.

http://www.matrixtsl.com/wiki/index.php ... 28Comms%29