Program freeze and missing 16x4 lcd

A forums to allow bugs and problems with Flowcode v6 to be reported and resolved.

Moderator: Benj

Leon07
Posts: 6
Joined: Wed Mar 30, 2016 6:55 am
Has thanked: 3 times
Contact:

Program freeze and missing 16x4 lcd

Postby Leon07 » Wed Mar 30, 2016 7:18 am

Hi!

1. If create one Pic project and if selected "Output", "GLCD (ssd1322) Parallel" and use "Run" (Flowchart simulation), no problem. If save the project, no see problem. But if compile to c or hex, program freeze and not create other files (.c, .asm, etc.). System restart not help this problem. Any ideas?

2. Other problem. I not see the "Output" list 16x4 char. lcd. How to add to project 16x4 char. lcd or how to settings other (20x4 or 16x2) lcd-s?

Thank you for help!

P.S.(Sorry my bad english)

User avatar
Benj
Matrix Staff
Posts: 14151
Joined: Mon Oct 16, 2006 10:48 am
Location: Matrix TS Ltd
Has thanked: 4330 times
Been thanked: 4080 times
Contact:

Re: Program freeze and missing 16x4 lcd

Postby Benj » Wed Mar 30, 2016 9:41 am

Hello,

Many thanks for letting us know about the SSD1322 issue. We are investigating this now.

The 16x4 and 20x4 LCD can be found under Search -> Outputs -> LCD (Generic).
These users thanked the author Benj for the post:
Leon07 (Wed Mar 30, 2016 10:25 am)
Rating: 5.56%
 

Leon07
Posts: 6
Joined: Wed Mar 30, 2016 6:55 am
Has thanked: 3 times
Contact:

Re: Program freeze and missing 16x4 lcd

Postby Leon07 » Wed Mar 30, 2016 10:23 am

Hi Benj!

Thank you for reply. 16x4 lcd problem solved, thanks again. :)