PIC 16F1938 PWM

A forums to allow bugs and problems with Flowcode v6 to be reported and resolved.

Moderator: Benj

Maxheadroom
Posts: 10
Joined: Thu Sep 03, 2015 12:59 pm
Been thanked: 3 times
Contact:

PIC 16F1938 PWM

Postby Maxheadroom » Tue Apr 12, 2016 2:31 pm

I would like to report a bug in v6.1.3.2 PWM channels 1,2,3 are not working what ever I try on the 16F1938, however channels 4,5 are working just fine. is there any way of fixing this quickly.

thanks Max...

User avatar
Benj
Matrix Staff
Posts: 14130
Joined: Mon Oct 16, 2006 10:48 am
Location: Matrix TS Ltd
Has thanked: 4325 times
Been thanked: 4070 times
Contact:

Re: PIC 16F1938 PWM

Postby Benj » Tue Apr 12, 2016 2:50 pm

Hello Max,

Please can you try this and let us know how you get on.

Simply copy the file to your "Flowcode 6\CAL\PIC" folder and re-compile.

PIC_CAL_PWM.c
(14.75 KiB) Downloaded 410 times


If this doesn't work then please can you attach your Flowcode .fcfx project file and we will take a look for you.
These users thanked the author Benj for the post (total 3):
dannyvanneijenhoff (Sun Apr 17, 2016 4:05 pm) • medelec35 (Sat May 07, 2016 1:04 pm) • JUZAR (Mon May 09, 2016 10:04 am)
Rating: 16.67%
 

Maxheadroom
Posts: 10
Joined: Thu Sep 03, 2015 12:59 pm
Been thanked: 3 times
Contact:

Re: PIC 16F1938 PWM

Postby Maxheadroom » Tue Apr 12, 2016 3:46 pm

yep all good now.
thanks, Max

dannyvanneijenhoff
Posts: 52
Joined: Thu Feb 07, 2008 7:59 am
Has thanked: 11 times
Been thanked: 7 times
Contact:

Re: PIC 16F1938 PWM

Postby dannyvanneijenhoff » Sun Apr 17, 2016 3:58 pm

Yessss, this works also for the 16F886 / 16F887 / 16F888. :D

PWM wat not working anymore, sinds upate 6.1.3.2 :cry: