I am looking for a way to monitor all of the values in a ram array during simulation.
After reading this post, http://www.matrixtsl.com/mmforums/viewt ... 63&t=19480, it appears the Console is available for the Standard version by adding the "Test and Debugging" license.
Can the Console simulate a Ram array? Not sure if the attached would work which, I pieced together from the Wikiv7 . Am I on the right track? Any help is appreciated.
I just want to make sure the Console will do what I need before making the purchase.
Simulating a ram array
Moderator: Benj
-
- Matrix Staff
- Posts: 9520
- Joined: Sat May 05, 2007 2:27 pm
- Location: Northamptonshire, UK
- Has thanked: 2585 times
- Been thanked: 3815 times
- Contact:
Re: Simulating a ram array
Hi Kenrix2,
This is what you can see if you have the Test and Debugging: Hope this helps
Martin
This is what you can see if you have the Test and Debugging: Hope this helps
Martin
Martin
-
- Flowcode v5 User
- Posts: 211
- Joined: Tue Feb 19, 2013 9:51 pm
- Has thanked: 72 times
- Been thanked: 177 times
- Contact:
Re: Simulating a ram array
Thanks for showing me that.
Nice to see that it has scroll bars.
The Console seems to be printing the command /n instead of actually creating a new line.
Flowcode7 simplifies the use of larger arrays. Not having to deal with bank and page limitations is a real treat. Not sure if simulating them is doable though.
Nice to see that it has scroll bars.
The Console seems to be printing the command /n instead of actually creating a new line.
Flowcode7 simplifies the use of larger arrays. Not having to deal with bank and page limitations is a real treat. Not sure if simulating them is doable though.
-
- Matrix Staff
- Posts: 9520
- Joined: Sat May 05, 2007 2:27 pm
- Location: Northamptonshire, UK
- Has thanked: 2585 times
- Been thanked: 3815 times
- Contact:
Re: Simulating a ram array
Hi.
I have just noticed that it should be \n instead of /n which is why it's not working: MartinKenrix2 wrote:The Console seems to be printing the command /n instead of actually creating a new line.
Martin
-
- Flowcode v5 User
- Posts: 211
- Joined: Tue Feb 19, 2013 9:51 pm
- Has thanked: 72 times
- Been thanked: 177 times
- Contact:
Re: Simulating a ram array
Added the "Test and Debug" license. Made a change so the location and ram array values are side by side seperated by spaces. Much easier to read it this way.
It now looks like this: Here is the new version.
It now looks like this: Here is the new version.
- Attachments
-
- Simulating_a_Ram_Array_V2.fcfx
- (8.8 KiB) Downloaded 187 times