USB Pic32

For Flowcode users to discuss projects, flowcharts, and any other issues related to Flowcode 7.

Moderator: Benj

Post Reply
stefan.erni
Valued Contributor
Valued Contributor
Posts: 654
Joined: Fri Aug 19, 2016 2:09 pm
Location: switzerland
Has thanked: 182 times
Been thanked: 179 times
Contact:

USB Pic32

Post by stefan.erni »

hi
I wrote a simple program, just initialise the USB (as serial) and send every 3second a "hallo" and led a LED flash.
Compiele und run in the harware is working.
I can generate a usb driver.
But when I connect the USB-cable to the Computer (win7) I can not see a USB Device.
The hardware is an PIC32-PINGUINO-MICRO-REV-B from Olimex.

the controller is an:
Pic32MX440F256H

User avatar
Benj
Matrix Staff
Posts: 15312
Joined: Mon Oct 16, 2006 10:48 am
Location: Matrix TS Ltd
Has thanked: 4803 times
Been thanked: 4314 times
Contact:

Re: USB Pic32

Post by Benj »

Hello,

We have not yet tackled USB on the PIC32 range. It is on the list and should hopefully be coming soon hopefully along with other USB improvements.

The USB component info tooltip should help you to know which device families are supported.

User avatar
QMESAR
Valued Contributor
Valued Contributor
Posts: 1287
Joined: Sun Oct 05, 2014 3:20 pm
Location: Russia
Has thanked: 384 times
Been thanked: 614 times
Contact:

Re: USB Pic32

Post by QMESAR »

Benj wrote:We have not yet tackled USB on the PIC32 range
:D This is bad news for me too,I am developing a low pin count Low cost USB board for PIC32 and was hoping to proto type with FC7 :(

Have good one

User avatar
Benj
Matrix Staff
Posts: 15312
Joined: Mon Oct 16, 2006 10:48 am
Location: Matrix TS Ltd
Has thanked: 4803 times
Been thanked: 4314 times
Contact:

Re: USB Pic32

Post by Benj »

I'll see if I can bump this one up the list.

stefan.erni
Valued Contributor
Valued Contributor
Posts: 654
Joined: Fri Aug 19, 2016 2:09 pm
Location: switzerland
Has thanked: 182 times
Been thanked: 179 times
Contact:

Re: USB Pic32

Post by stefan.erni »

Hi Ben
Is it on the list :) ?
Or do you have a good idea how to use the usb on PIC 32?

User avatar
QMESAR
Valued Contributor
Valued Contributor
Posts: 1287
Joined: Sun Oct 05, 2014 3:20 pm
Location: Russia
Has thanked: 384 times
Been thanked: 614 times
Contact:

Re: USB Pic32

Post by QMESAR »

stefan.erni wrote: Is it on the list :) ?
Or do you have a good idea how to use the usb on PIC 32?
Hi Team,
I am just as excited as Stephan regarding the PIC32 USB stuff :D

:D

User avatar
Benj
Matrix Staff
Posts: 15312
Joined: Mon Oct 16, 2006 10:48 am
Location: Matrix TS Ltd
Has thanked: 4803 times
Been thanked: 4314 times
Contact:

Re: USB Pic32

Post by Benj »

I started to look into this last week. I got slightly further but still not happy with it just yet. Hopefully find some more time this week to finish it off.

stefan.erni
Valued Contributor
Valued Contributor
Posts: 654
Joined: Fri Aug 19, 2016 2:09 pm
Location: switzerland
Has thanked: 182 times
Been thanked: 179 times
Contact:

Re: USB Pic32

Post by stefan.erni »

Hi Ben

Can I have this as beta version?

I can try and help a little.

regards
Stefan

Speed64
Posts: 39
Joined: Sat Jul 16, 2016 12:08 pm
Has thanked: 4 times
Been thanked: 2 times
Contact:

Re: USB Pic32

Post by Speed64 »

Hello,
Also has a problem.
FVBUSONION can not be changed to
Controlled by the USB Module
It bounces back.

Win 10 64Bit

Sincerely Uwe
Attachments
Konfig.PNG
(23.21 KiB) Downloaded 5913 times

stefan.erni
Valued Contributor
Valued Contributor
Posts: 654
Joined: Fri Aug 19, 2016 2:09 pm
Location: switzerland
Has thanked: 182 times
Been thanked: 179 times
Contact:

Re: USB Pic32

Post by stefan.erni »

Hallo Uwe

Benutzt Du PIC32?

Speed64
Posts: 39
Joined: Sat Jul 16, 2016 12:08 pm
Has thanked: 4 times
Been thanked: 2 times
Contact:

Re: USB Pic32

Post by Speed64 »

Moin,

ja, ich benutze einen PIC32.
Ich habe es mit verschiedenen PIC32 versucht.


PIC18F2550 habe ich zum laufen bekommen.

Ich benutze USB CDC.

mit freundlichem Gruß
Uwe

Tel 04499386300
ich rufe gerne zurück


Hello,

Yes, I use a PIC32.
I have tried it with different PIC32.


PIC18F2550 I got to run.

I use USB CDC.

Sincerely
Uwe

stefan.erni
Valued Contributor
Valued Contributor
Posts: 654
Joined: Fri Aug 19, 2016 2:09 pm
Location: switzerland
Has thanked: 182 times
Been thanked: 179 times
Contact:

Re: USB Pic32

Post by stefan.erni »

Hi Uwe
Usb with Pic 32 is not jet working with flowcode7. Thats what I understand
I hope soon we have a "trial" version.

04499386300
is this number correct?
regards

Stefan

User avatar
QMESAR
Valued Contributor
Valued Contributor
Posts: 1287
Joined: Sun Oct 05, 2014 3:20 pm
Location: Russia
Has thanked: 384 times
Been thanked: 614 times
Contact:

Re: USB Pic32

Post by QMESAR »

Hi Uwe and Stephan

In my understanding too FC7 USB for PIC32 is not working yet however have seen some post by Ben that he is progressing on this so i guess it will be there in the near future
I am also waiting for PIC32 USB support blocks :D

Gruss

QMESAR

Speed64
Posts: 39
Joined: Sat Jul 16, 2016 12:08 pm
Has thanked: 4 times
Been thanked: 2 times
Contact:

Re: USB Pic32

Post by Speed64 »

Hi Benj,

How is it going on?

Sincerely
Speed64

Post Reply