HI Dears
can you please send me the Modification informations of reaplacing Lcd _eb005 to gLCD EBM001
when making changes in icon Call componenet macro finding pionts of Cross and Ascll for setting gLCD
WR
Nasim
reaplacing Lcd _eb005 to gLCD EBM001
Moderator: Benj
-
- Posts: 90
- Joined: Wed Oct 15, 2014 5:20 pm
- Has thanked: 1 time
- Been thanked: 3 times
- Contact:
- Benj
- Matrix Staff
- Posts: 15312
- Joined: Mon Oct 16, 2006 10:48 am
- Location: Matrix TS Ltd
- Has thanked: 4803 times
- Been thanked: 4314 times
- Contact:
Re: reaplacing Lcd _eb005 to gLCD EBM001
Hi Nasim,
How's this for an example, used in the same way as you would an Alphanumeric LCD.
How's this for an example, used in the same way as you would an Alphanumeric LCD.
Regards Ben Rowland - MatrixTSL
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
-
- Posts: 444
- Joined: Tue Apr 15, 2014 4:19 pm
- Location: Kajaani, Finland
- Has thanked: 345 times
- Been thanked: 227 times
- Contact:
Re: reaplacing Lcd _eb005 to gLCD EBM001
The glcd and character displays are very different beasts and you need to work on your code a bit.
Happily, flowcode 7 has easy macros to help you out and saves some icons in the way if youre using gLCD.
But you just need to start moving in your code through, and coding the glcd manually to same way as LCD.
Basically, in the below you see example of 16x2 lcd code modified to be working with GLCD.
16x2LCD: GLCD:
Happily, flowcode 7 has easy macros to help you out and saves some icons in the way if youre using gLCD.
But you just need to start moving in your code through, and coding the glcd manually to same way as LCD.
Basically, in the below you see example of 16x2 lcd code modified to be working with GLCD.
16x2LCD: GLCD:
Ill just keep the good work up!
-
- Posts: 90
- Joined: Wed Oct 15, 2014 5:20 pm
- Has thanked: 1 time
- Been thanked: 3 times
- Contact:
Re: reaplacing Lcd _eb005 to gLCD EBM001
Thanks: Ben. the display works good .only thing is missing to get the necessary current value to 3v3 to get the contrast ok
the data sheet that I receive is very small to understand the necessary current to calculate V/I to get the Value for Resistor
can you please send me an expanded copy of datasheet or the needed current value .
with regards
Nasim
the data sheet that I receive is very small to understand the necessary current to calculate V/I to get the Value for Resistor
can you please send me an expanded copy of datasheet or the needed current value .
with regards
Nasim
- Benj
- Matrix Staff
- Posts: 15312
- Joined: Mon Oct 16, 2006 10:48 am
- Location: Matrix TS Ltd
- Has thanked: 4803 times
- Been thanked: 4314 times
- Contact:
Re: reaplacing Lcd _eb005 to gLCD EBM001
Hi Nasim,
You cannot convert 5V to 3V3 to drive the display with a resistor based potential divider. You will need a 3V3 voltage regulator to be able to provide the current required.
You cannot convert 5V to 3V3 to drive the display with a resistor based potential divider. You will need a 3V3 voltage regulator to be able to provide the current required.
Regards Ben Rowland - MatrixTSL
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel