Can Flowcode 7 or 8 programs M2 from Macchina?

For Flowcode users to discuss projects, flowcharts, and any other issues related to Flowcode 7.

Moderator: Benj

Post Reply
kennethnilsen69
Posts: 101
Joined: Tue Sep 01, 2015 9:37 pm
Been thanked: 14 times
Contact:
Contact kennethnilsen69

Can Flowcode 7 or 8 programs M2 from Macchina?

Post by kennethnilsen69 »

Can Flowcode 7 or 8 programs M2 from Macchina?
https://www.cnx-software.com/2017/03/10 ... wdfunding/
Top
User avatar
Benj
Matrix Staff
Posts: 15312
Joined: Mon Oct 16, 2006 10:48 am
Location: Matrix TS Ltd
Has thanked: 4803 times
Been thanked: 4314 times
Contact:
Contact Benj

Re: Can Flowcode 7 or 8 programs M2 from Macchina?

Post by Benj »

Hello,

Your link appears to be broken, can you check it is correct.
Top
kennethnilsen69
Posts: 101
Joined: Tue Sep 01, 2015 9:37 pm
Been thanked: 14 times
Contact:
Contact kennethnilsen69

Re: Can Flowcode 7 or 8 programs M2 from Macchina?

Post by kennethnilsen69 »

Sorry, we try again :-)

https://www.cnx-software.com/2017/03/10 ... wdfunding/
Top
User avatar
Benj
Matrix Staff
Posts: 15312
Joined: Mon Oct 16, 2006 10:48 am
Location: Matrix TS Ltd
Has thanked: 4803 times
Been thanked: 4314 times
Contact:
Contact Benj

Re: Can Flowcode 7 or 8 programs M2 from Macchina?

Post by Benj »

Hello,

Thanks for correcting the link.

I'm afraid we don't currently support the microcontroller on the M2 board "Atmel SAM3X8E".
Top
Post Reply

Return to “Flowcode V7”