Pin configuration change after save/close/open

[stefan.erni]

Hi Ben

If I configurate the UART with the corect Pin for RX = F2 and TX= F8. After save and close/open again, the Pin for RX/TX change to A14/A15.
Thats confusing....
And I dont understand why RX/TX remable is showing

b4save.PNG

(19.78 KiB) Downloaded 1021 times

save_and_later.PNG

(18.2 KiB) Downloaded 1021 times

Flowcode_test_2018_sdcard1.fcfx

(45.03 KiB) Downloaded 231 times

[Benj]

Hello Stefan,

Many thanks for letting us know.

I've had a bit of a go with the component and now think that I've solved the problem for you.

Simply copy the attached into your "Flowcode 7/Components" directory and restart Flowcode.

RS232.fcpx

(14.96 KiB) Downloaded 227 times

Let us know how you get on.

[stefan.erni]

Hi Ben

Perfect. it's ok now.
Another idea of the serialport....
Can you support in the selector
230400Bd
460800Bd
921600Bd

And can you include in the software uart a very simple IRQ like in the hardware uart?