EEPROM

A forums to allow resolved bugs and problems with Flowcode v7 to be stored and marked as resolved.

Moderator: Benj

User avatar
Osta
Posts: 146
Joined: Tue Jul 05, 2016 9:42 am
Been thanked: 13 times
Contact:

EEPROM

Postby Osta » Fri Jul 15, 2016 9:28 am

Do not read EEPROM ..
Attachments
MD_7.fcfx
(5.66 KiB) Downloaded 91 times

User avatar
PaulNe
Posts: 27
Joined: Fri Jul 05, 2013 8:36 am
Has thanked: 2 times
Been thanked: 22 times
Contact:

Re: EEPROM

Postby PaulNe » Fri Jul 15, 2016 12:32 pm

Hi Osta,

I do not have an 18F45K80 to test with, however, I changed the uC to a 16F1937 and using our EB006 with an LED board on PORTD. For me it is working perfect.

I added an EEPROM write to the code, to write my own value, and then verify by reading it back. It works perfectly in both hardware and simulation.

Hope this helps?

Paul
Attachments
MD_7_MatrixEdit.fcfx
(7.09 KiB) Downloaded 90 times

User avatar
Osta
Posts: 146
Joined: Tue Jul 05, 2016 9:42 am
Been thanked: 13 times
Contact:

Re: EEPROM

Postby Osta » Fri Jul 15, 2016 3:14 pm

Hi Paul!
Yes, with this processor, it works!
And with my not working .....
Attachments
EEPROM_OK.jpg
(414.33 KiB) Downloaded 993 times

User avatar
Osta
Posts: 146
Joined: Tue Jul 05, 2016 9:42 am
Been thanked: 13 times
Contact:

Re: EEPROM

Postby Osta » Thu Aug 04, 2016 7:51 pm

Hi paul!
Put update FC7_Latest_Files_040816.
EEPROM began to work !!!
But only a comma.
Through the point enters an incorrect value.
Regards Slava.
Attachments
MD_7.fcfx
(6.27 KiB) Downloaded 83 times

User avatar
medelec35
Valued Contributor
Valued Contributor
Posts: 8330
Joined: Sat May 05, 2007 2:27 pm
Location: Northamptonshire, UK
Has thanked: 2381 times
Been thanked: 3393 times
Contact:

Re: EEPROM

Postby medelec35 » Thu Aug 04, 2016 8:12 pm

Hi Slava,
Have you read this post?
After updating EEPROM may fully work for you?

Martin
These users thanked the author medelec35 for the post:
Benj (Sat Aug 06, 2016 7:58 pm)
Rating: 5.56%
 
Martin

If you read a post that is useful, please show appreciation by clicking on thumbs up Icon.

User avatar
Osta
Posts: 146
Joined: Tue Jul 05, 2016 9:42 am
Been thanked: 13 times
Contact:

Re: EEPROM

Postby Osta » Sat Aug 06, 2016 7:57 pm

Hi! Thanks Martin! I received the update, EEPROM works !!!!
Regards Slava.
These users thanked the author Osta for the post (total 2):
Benj (Sat Aug 06, 2016 7:58 pm) • medelec35 (Sat Aug 06, 2016 11:42 pm)
Rating: 11.11%