Page 1 of 1
Posted: Fri Jul 15, 2016 9:28 am
Do not read EEPROM ..
Posted: Fri Jul 15, 2016 12:32 pm
I do not have an 18F45K80 to test with, however, I changed the uC to a 16F1937 and using our EB006 with an LED board on PORTD. For me it is working perfect.
I added an EEPROM write to the code, to write my own value, and then verify by reading it back. It works perfectly in both hardware and simulation.
Hope this helps?
Posted: Fri Jul 15, 2016 3:14 pm
Yes, with this processor, it works!
And with my not working .....
Posted: Thu Aug 04, 2016 7:51 pm
Put update FC7_Latest_Files_040816.
EEPROM began to work !!!
But only a comma.
Through the point enters an incorrect value.
Posted: Thu Aug 04, 2016 8:12 pm
Have you read this post
After updating EEPROM may fully work for you?
Posted: Sat Aug 06, 2016 7:57 pm
Hi! Thanks Martin! I received the update, EEPROM works !!!!