PIC18F87K22 RC0 - RC1 not work ! [Solved]

A forums to allow resolved bugs and problems with Flowcode v7 to be stored and marked as resolved.

Moderator: Benj

xelites
Posts: 29
Joined: Thu Nov 06, 2014 9:47 am
Been thanked: 7 times
Contact:

PIC18F87K22 RC0 - RC1 not work ! [Solved]

Postby xelites » Mon Oct 10, 2016 9:46 am

hello Benj, use the pic 18f87k22 but RC0 and RC1 doors do not work! I enclose simple blink program. the problem is that even changing the configuration bits (bit32 and bit 40) as in Bit set file in attached the result does not change and does not work for me even the PWM configurations of these pins. Thanks await feedback

Gabriele
Attachments
Motus_test.fcfx
ex. program
(7.57 KiB) Downloaded 73 times
Bit set.JPG
file bit config
(134.92 KiB) Downloaded 580 times

User avatar
LeighM
Matrix Staff
Posts: 1544
Joined: Tue Jan 17, 2012 10:07 am
Has thanked: 385 times
Been thanked: 541 times
Contact:

Re: PIC18F87K22 RC0 - RC1 not work !

Postby LeighM » Mon Oct 10, 2016 3:17 pm

I think your "SOSC Power Selection..." needs to be set to Digital, not SOSC circuit selected

xelites
Posts: 29
Joined: Thu Nov 06, 2014 9:47 am
Been thanked: 7 times
Contact:

Re: PIC18F87K22 RC0 - RC1 not work !

Postby xelites » Mon Oct 10, 2016 3:53 pm

Now I try

xelites
Posts: 29
Joined: Thu Nov 06, 2014 9:47 am
Been thanked: 7 times
Contact:

Re: PIC18F87K22 RC0 - RC1 not work !

Postby xelites » Mon Oct 10, 2016 4:02 pm

yess :-) ok problem solved thanks very much
These users thanked the author xelites for the post (total 2):
Benj (Mon Oct 10, 2016 4:03 pm) • LeighM (Tue Oct 11, 2016 8:28 am)
Rating: 11.76%
 

xelites
Posts: 29
Joined: Thu Nov 06, 2014 9:47 am
Been thanked: 7 times
Contact:

Re: PIC18F87K22 RC0 - RC1 not work !

Postby xelites » Mon Oct 10, 2016 4:07 pm

You can remove the post LeighM I thought it was a bug sorry
Good job everyone