using 30 Day trial of Flowcode V7. loaded pickit3 programmer , cant get it to accept chip name . what am I doing wrong?
C:\Program Files (x86)\Flowcode 7\compilers\pic\bin\xc8.exe -P12F1840 -FLEDblink.hex -E -M -Y
: : (902) no chip name specified; use "PICC --CHIPINFO" to see available chip names (error)
Pickit3 programming problem in Flowcode V7
Moderator: Benj
-
- Posts: 2
- Joined: Mon May 14, 2018 12:08 pm
- Contact:
-
- Posts: 2
- Joined: Mon May 14, 2018 12:08 pm
- Contact:
Re: Pickit3 programming problem in Flowcode V7
The compiler parameters are correct and the window has all the details , it just isn't picking it up
- Benj
- Matrix Staff
- Posts: 15312
- Joined: Mon Oct 16, 2006 10:48 am
- Location: Matrix TS Ltd
- Has thanked: 4803 times
- Been thanked: 4314 times
- Contact:
Re: Pickit3 programming problem in Flowcode V7
Hello,
It looks like you may have put the programmer parameters into the compiler settings.
There are three option tabs in the compiler options window, compile, link, program. It's the program tab that you need to override for the PICkit to function.
It looks like you may have put the programmer parameters into the compiler settings.
There are three option tabs in the compiler options window, compile, link, program. It's the program tab that you need to override for the PICkit to function.
This should look like this.C:\Program Files (x86)\Flowcode 7\compilers\pic\bin\xc8.exe -P12F1840 -FLEDblink.hex -E -M -Y
C:\Program Files (x86)\Flowcode 7\compilers\pic\bin\xc8.exe --chip=12F1840 "LEDblink.c" --MSGDISABLE=359,1273,1388
Regards Ben Rowland - MatrixTSL
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel