Hello.
I bought flowcode 9 with all the necessary licenses.
Works on everything except STM.
We bought the program to work on STM.
But it does not compile and does not give me a Hex file.
Please if you can help me
Flowcode 9 STM Issue
-
- Posts: 1
- Joined: Tue May 18, 2021 7:59 am
- Contact:
-
- Matrix Staff
- Posts: 9520
- Joined: Sat May 05, 2007 2:27 pm
- Location: Northamptonshire, UK
- Has thanked: 2585 times
- Been thanked: 3815 times
- Contact:
Re: Flowcode 9 STM Issue
Hi, Pablito_eskobar.
I have moved your post , so you want not hijacking a different Topic.
This forum is for Flowcode up to V8
There is a dedicated V9 forum here.
You should be able to log in with your user name and password you used for V9.
If not registered, you can register here.
You will also need to post an example project, along with the .msg.txt that is in the project folder.
I have moved your post , so you want not hijacking a different Topic.
This forum is for Flowcode up to V8
There is a dedicated V9 forum here.
You should be able to log in with your user name and password you used for V9.
If not registered, you can register here.
You will also need to post an example project, along with the .msg.txt that is in the project folder.
Martin