Page 1 of 1

Lookup table in flowcode 4

Posted: Fri Jan 20, 2012 6:01 am
by Rahul Kulkarni
I am doing programming of PIC18F458 using flowcode 4. I want to know how to use lookup tables in flowcode 4. This is first time I am using flowcode 4. So will this code can b directly use on controller chip?

Re: Lookup table in flowcode 4

Posted: Fri Jan 20, 2012 8:49 am
by medelec35
Hi Rahul,
Have you seen:
http://www.matrixmultimedia.com/mmforum ... 26&t=10066
Its a look-up table tutorial I posted yesterday.
It also has a flowchart with a working example.
Because C code is uses the example is unable to show correct results in simulation (will always be 0).
To see it working it will require hardware or a simulator that works with C code e.g
like the one shown here:
http://www.matrixmultimedia.com/mmforum ... 98&#p24998