I'm just wondering if the problem issues flagged in a previous post have been resolved. To recap:
1. unit would not program when powered from USB, it actually needs 9V power (due to voltage drop on diode + 78M05 regulator)
2. voltage on C18 way over rated spec of the component, component running warm (!!!) (37V were reported as measured across it, part rated at 25V DC)
3. various driver related issues, some to overcome the 2 hardware problems above
The post below details all these issues in more details. Thanks to the hard work of the posters!
http://www.matrixmultimedia.com/mmforum ... 6&start=50
I am just interested in knowing if the problems have been addressed or not, is there a recall, should I buy or hold?