how to use mikroe microchip boards (clicker) with FC7 and bootloader from microe
I have from MikroeElektronika a board CLICKER pic32MX
https://shop.mikroe.com/clicker-pic32mx
I made a new project with a PIC32MX534F064H
But I ned an info how to program it with the USB.
I already flash the bootloader from Microe.
how to use mikroe boards (clicker) with FC7 and bootloader
-
- Valued Contributor
- Posts: 654
- Joined: Fri Aug 19, 2016 2:09 pm
- Location: switzerland
- Has thanked: 182 times
- Been thanked: 179 times
- Contact:
- LeighM
- Matrix Staff
- Posts: 2178
- Joined: Tue Jan 17, 2012 10:07 am
- Has thanked: 481 times
- Been thanked: 699 times
- Contact:
Re: how to use mikroe boards (clicker) with FC7 and bootload
Hi,
I'm not familiar with this product, but a quick look at the website and it looks like there is a windows GUI app available to program them via the bootloader.
You would need to use this to download the hex file that Flowcode generates.
It would also need checking to see if there is any requirement for an offset for the program start address.
Hope that gets you started, let us know how you get on and if you need any further help.
I'm not familiar with this product, but a quick look at the website and it looks like there is a windows GUI app available to program them via the bootloader.
You would need to use this to download the hex file that Flowcode generates.
It would also need checking to see if there is any requirement for an offset for the program start address.
Hope that gets you started, let us know how you get on and if you need any further help.
-
- Valued Contributor
- Posts: 654
- Joined: Fri Aug 19, 2016 2:09 pm
- Location: switzerland
- Has thanked: 182 times
- Been thanked: 179 times
- Contact:
Re: how to use mikroe boards (clicker) with FC7 and bootload
Hi LeighM
Thank you for the info.But I like to flash with one mouseclick. This is something I like very much at Flowcode.
For this board with the PIC32MX534F064H I'm lucky. There is also the ICSP header. There I will connect my PICkit3 programer. This runs very comfortably with the FC7. Perhaps there is in the future a possibility also over the USB interface to program directly from FC7 as I make it of microchip chipkit wf32 with flowcode.
Briefly explained Mikroelektronika has a "click" system with over 250 small clickboards. These can be plugged into various small developer boards (with Pic microchip) or on different shields suitable for Arduino boards.
I have so many possibilities with FC7 these to program.
Thank you for the info.But I like to flash with one mouseclick. This is something I like very much at Flowcode.
For this board with the PIC32MX534F064H I'm lucky. There is also the ICSP header. There I will connect my PICkit3 programer. This runs very comfortably with the FC7. Perhaps there is in the future a possibility also over the USB interface to program directly from FC7 as I make it of microchip chipkit wf32 with flowcode.
Briefly explained Mikroelektronika has a "click" system with over 250 small clickboards. These can be plugged into various small developer boards (with Pic microchip) or on different shields suitable for Arduino boards.
I have so many possibilities with FC7 these to program.