Hi Ben
Is the ICD4 from Microchip working with FC7?
DV164045
http://www.microchip.com/DevelopmentToo ... O=DV164045
MPLAB ICD 4 In-Circuit Debugger working with FC7
-
- Valued Contributor
- Posts: 654
- Joined: Fri Aug 19, 2016 2:09 pm
- Location: switzerland
- Has thanked: 182 times
- Been thanked: 179 times
- Contact:
- Benj
- Matrix Staff
- Posts: 15312
- Joined: Mon Oct 16, 2006 10:48 am
- Location: Matrix TS Ltd
- Has thanked: 4803 times
- Been thanked: 4314 times
- Contact:
Re: MPLAB ICD 4 In-Circuit Debugger working with FC7
Hello,
I think you will be able to program via the ICD4 if the MPLAB IPE software supports it.
Here are the instructions for using IPE with a ICD3.
https://www.matrixtsl.com/wikiv7/index. ... _.28NEW.29
Fingers crossed you should just swap the parameter /TPICD3 for /TPICD4.
I think you will be able to program via the ICD4 if the MPLAB IPE software supports it.
Here are the instructions for using IPE with a ICD3.
https://www.matrixtsl.com/wikiv7/index. ... _.28NEW.29
Fingers crossed you should just swap the parameter /TPICD3 for /TPICD4.
Regards Ben Rowland - MatrixTSL
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel