RN4677 Initialise ok but no connect

For questions and comments on programming in general. And for any items that don't fit into the forums below.

Moderators: Benj, Mods

stefan.erni
Posts: 539
Joined: Fri Aug 19, 2016 2:09 pm
Location: switzerland
Has thanked: 169 times
Been thanked: 158 times
Contact:

RN4677 Initialise ok but no connect

Postby stefan.erni » Fri Oct 11, 2019 10:51 am

Hi Ben

Sending to the BN4677 is ok.
receiving is working.
it pass the Initialise
But no computer, laptop or phone can see the modul

send_to_BN.PNG
send_to_BN.PNG (3.96 KiB) Viewed 425 times


received_from_BN.PNG
received_from_BN.PNG (4.58 KiB) Viewed 425 times

stefan.erni
Posts: 539
Joined: Fri Aug 19, 2016 2:09 pm
Location: switzerland
Has thanked: 169 times
Been thanked: 158 times
Contact:

Re: RN4677 Initialise ok but no connect

Postby stefan.erni » Fri Oct 11, 2019 3:22 pm

Hi Ben

Ok. I changed the Modul RN4677 and now win7, win10 and android can see the "flowblue".(ios not)
Now I'm working on win10 and try to add "services" in the "flowblue" propertis, but win10 can not found a service from the modul.

stefan.erni
Posts: 539
Joined: Fri Aug 19, 2016 2:09 pm
Location: switzerland
Has thanked: 169 times
Been thanked: 158 times
Contact:

Re: RN4677 Initialise ok but no connect

Postby stefan.erni » Thu Oct 17, 2019 3:02 pm

Hi Ben

After the update from Flowcode to V8.2.1.13 the BT Modul is working fine.
It's connecting and I can transmit and receive data in both direction.

regards

Stefan