Development 3 board datasheet

For questions and comments on programming in general. And for any items that don't fit into the forums below.

Moderators: Benj, Mods

Posts: 11
Joined: Fri Dec 09, 2005 3:03 am
Location: South Wales

Development 3 board datasheet

Postby Hurdy » Fri Dec 09, 2005 3:12 am

Is there a datasheet for the development 3 PIC board?
I'm TRYING to use my board with an ICD2 where I need a power supply for my board. I've bought a variable voltage supply at 500mA, but not sure what voltage to set it to as it doesn't say in the PDF sheet on the site.

Any ideas anyone?

Posts: 110
Joined: Thu Sep 29, 2005 10:53 am
Location: Matrix Multimedia
Been thanked: 1 time

Postby Ian » Tue Jan 03, 2006 5:55 pm

There should be a datasheet for the HP488 Development board on the ELSAM mini Cd shipped with the board.

If not email me and I will send you the datasheet.

The PSU we use is a 13.5V 250mA power supply.
13.5v is recommended, but you can normally get away with 12V if it does not have a 13.5V setting.

The connector is Positive Outer 5.0x2.1 socket.