Is there a datasheet for the development 3 PIC board?
I'm TRYING to use my board with an ICD2 where I need a power supply for my board. I've bought a variable voltage supply at 500mA, but not sure what voltage to set it to as it doesn't say in the PDF sheet on the site.
Any ideas anyone?
Development 3 board datasheet
-
- Posts: 110
- Joined: Thu Sep 29, 2005 10:53 am
- Location: Matrix Multimedia
- Been thanked: 1 time
- Contact:
There should be a datasheet for the HP488 Development board on the ELSAM mini Cd shipped with the board.
If not email me and I will send you the datasheet.
ian@matrixmultimedia.co.uk
The PSU we use is a 13.5V 250mA power supply.
13.5v is recommended, but you can normally get away with 12V if it does not have a 13.5V setting.
The connector is Positive Outer 5.0x2.1 socket.
If not email me and I will send you the datasheet.
ian@matrixmultimedia.co.uk
The PSU we use is a 13.5V 250mA power supply.
13.5v is recommended, but you can normally get away with 12V if it does not have a 13.5V setting.
The connector is Positive Outer 5.0x2.1 socket.