Error

For questions and comments on programming in general. And for any items that don't fit into the forums below.

Moderators: Benj, Mods

Post Reply
TerryV
Posts: 33
Joined: Tue Feb 21, 2006 10:06 am
Contact:

Error

Post by TerryV »

Hi,
I am constantly getting the following message when I attempt tpo download.

"Registry Error - Failed to get data for use of LVP'

Any suggestions.

Thanks

User avatar
Benj
Matrix Staff
Posts: 15312
Joined: Mon Oct 16, 2006 10:48 am
Location: Matrix TS Ltd
Has thanked: 4803 times
Been thanked: 4314 times
Contact:

Re: Error

Post by Benj »

Hello Terry

I would uninstall and reinstall Flowcode if you are using v4. Otherwise you will need to uninstal and reinstall the Matrix PPP software. The latest versions of both of these software distributions can be found on our website.

Let me know how you get on.

TerryV
Posts: 33
Joined: Tue Feb 21, 2006 10:06 am
Contact:

Re: Error

Post by TerryV »

Hi Ben,
I am using C for PICs and have tried uninstalling and reinstalling both C4PICS and PPP but no go.

I have a copy installed on my desk top machine and that works fine with the V3 dev board. So the problem has obviously developed on my laptop

But, where to from here?

Cheers

Terry

User avatar
Benj
Matrix Staff
Posts: 15312
Joined: Mon Oct 16, 2006 10:48 am
Location: Matrix TS Ltd
Has thanked: 4803 times
Been thanked: 4314 times
Contact:

Re: Error

Post by Benj »

Hello Terry

What version of PPP are you using? It might be worth installing the latest version (v3.9) to see if that fixes your problem.

http://www.matrixmultimedia.com/software/PPPv3.exe

If this does not help then what operating system are you using and are you logged in with admin access when installing.

TerryV
Posts: 33
Joined: Tue Feb 21, 2006 10:06 am
Contact:

Re: Error

Post by TerryV »

Problem solved .

Thanks Ben.

PPP V3.9 works fine.

Thanks

Cheers

Post Reply