PIC32MZ2048EFM100 simulation error. (SOLVED)

An area to discuss 32-bit PIC specific problems and examples

Moderator: Benj

Lagoda
Posts: 124
Joined: Fri Jul 15, 2016 9:51 pm
Has thanked: 57 times
Been thanked: 44 times
Contact:

PIC32MZ2048EFM100 simulation error. (SOLVED)

Postby Lagoda » Wed Jul 19, 2017 9:44 pm

Hi All,

I would like to ask for help.
I have a CURIOSITY PIC32 MZ EF development board with PIC32MZ2048EFM100 processor.
Unfortunately, I can not start the simulation of flowchart with this processor.
I tried on two computers (WIN7 64bit HUN on both machines).
On one of two computer, if I click on the simulation launch icon, then Flowcode7 crashed. (I get a Windows message: Flowcode V7 Operation Stopped)
If I press the F5 key for start the simulation then nothing happens.

For the Flowcode V7 running on another computer, the simulation can not be started.
(I can not start the simulation either with F5 and Start icon, but the Flowcode is running, do not stopped. )

I use Flowcode v7.2.0.5 and Flowcode_7_Latest_170717 files.

The simulation is working well for 8-bit and 16-bit processors.

Thank you in advance for your help.

Lagoda
Attachments
PIC32MZ_test.fcfx
(6.4 KiB) Downloaded 62 times
Last edited by Lagoda on Mon Jul 24, 2017 8:49 pm, edited 2 times in total.

User avatar
QMESAR
Valued Contributor
Valued Contributor
Posts: 1082
Joined: Sun Oct 05, 2014 3:20 pm
Has thanked: 333 times
Been thanked: 542 times
Contact:

Re: PIC32MZ2048EFM100 simulation error.

Postby QMESAR » Thu Jul 20, 2017 7:09 am

Hi.

For what it is worth your Flowchart runs fine with me in FC7 and WIN10 .
:D
Attachments
1.jpg
1.jpg (28.52 KiB) Viewed 2760 times
These users thanked the author QMESAR for the post:
Lagoda (Thu Jul 20, 2017 9:39 am)
Rating: 5.88%
 

Lagoda
Posts: 124
Joined: Fri Jul 15, 2016 9:51 pm
Has thanked: 57 times
Been thanked: 44 times
Contact:

Re: PIC32MZ2048EFM100 simulation error.

Postby Lagoda » Thu Jul 20, 2017 10:13 am

Hi,

Thank you for checking.
I guess it will be.

Would anyone try it in Windows 7 too?

Lagoda

User avatar
LeighM
Matrix Staff
Posts: 1768
Joined: Tue Jan 17, 2012 10:07 am
Has thanked: 417 times
Been thanked: 582 times
Contact:

Re: PIC32MZ2048EFM100 simulation error.

Postby LeighM » Thu Jul 20, 2017 1:20 pm

Runs OK on my Windows 7 (64bit) too
These users thanked the author LeighM for the post:
Lagoda (Thu Jul 20, 2017 1:54 pm)
Rating: 5.88%
 

User avatar
STibor
Posts: 260
Joined: Fri Dec 16, 2011 3:20 pm
Has thanked: 109 times
Been thanked: 111 times
Contact:

Re: PIC32MZ2048EFM100 simulation error.

Postby STibor » Fri Jul 21, 2017 4:21 am

Lagoda wrote:
I use Flowcode v7.2.0.5 and Flowcode_7_Latest_170717 files.


Hello,

The current version is Flowcode v7.2.1.4, I think you should update it.
After the upgrade, add the repair package.
Windows7 prof. 64bit HUN works perfectly for simulation.

Mr. LeighM will support this developer circuit?
I think this card has internal programming hardware.
How to use it? Or should PicKit3 be programmed?
These users thanked the author STibor for the post:
Lagoda (Fri Jul 21, 2017 8:52 am)
Rating: 5.88%
 

Lagoda
Posts: 124
Joined: Fri Jul 15, 2016 9:51 pm
Has thanked: 57 times
Been thanked: 44 times
Contact:

Re: PIC32MZ2048EFM100 simulation error. (SOLVED)

Postby Lagoda » Fri Jul 21, 2017 9:09 am

Hello Tibor,


Yes, that was the problem.
For the board has an ICSP Header connector.
I use PICKIT3 programmer for the programming.
Thanks for the help.

Lagoda