Toolchain flowcode 8

For Flowcode users to discuss projects, flowcharts, and any other issues related to Flowcode 8.

Moderator: Benj

markavo
Posts: 33
Joined: Wed Apr 11, 2018 11:10 pm
Has thanked: 10 times
Been thanked: 2 times
Contact:

Toolchain flowcode 8

Postby markavo » Wed May 23, 2018 4:12 pm

Just installed the 30day version of flowcode 8 tried to compile hex for Arm but i have an error of "arm compiler toolchain is not installed" is there a 3rd party compiler i need to install please.

Thanks.

User avatar
Steve
Matrix Staff
Posts: 3073
Joined: Tue Jan 03, 2006 3:59 pm
Has thanked: 87 times
Been thanked: 387 times
Contact:

Re: Toolchain flowcode 8

Postby Steve » Wed May 23, 2018 4:22 pm

All of the toolchains are available on the Flowcode download page:

https://www.matrixtsl.com/flowcode/download/

We have separated them from the main install to reduce it's size.
These users thanked the author Steve for the post:
markavo (Wed May 23, 2018 4:28 pm)
Rating: 5.26%
 

Alanj13100
Posts: 7
Joined: Sun Mar 24, 2019 10:57 am
Been thanked: 1 time
Contact:

Re: Toolchain flowcode 8

Postby Alanj13100 » Sun Mar 24, 2019 7:32 pm

I've down loaded the tool chain but still says not installed

User avatar
LeighM
Matrix Staff
Posts: 1888
Joined: Tue Jan 17, 2012 10:07 am
Has thanked: 445 times
Been thanked: 640 times
Contact:

Re: Toolchain flowcode 8

Postby LeighM » Mon Mar 25, 2019 12:29 pm

What is your target processor?
Have you installed the correct ARM toolchain?
These are normally installed at "//Program Files (86)/Flowcode/Common/Compilers"
Could you check what you have there?

User avatar
Benj
Matrix Staff
Posts: 14303
Joined: Mon Oct 16, 2006 10:48 am
Location: Matrix TS Ltd
Has thanked: 4396 times
Been thanked: 4123 times
Contact:

Re: Toolchain flowcode 8

Postby Benj » Mon Mar 25, 2019 12:41 pm

I've down loaded the tool chain but still says not installed


You've downloaded it but did you install it?

Alanj13100
Posts: 7
Joined: Sun Mar 24, 2019 10:57 am
Been thanked: 1 time
Contact:

Re: Toolchain flowcode 8

Postby Alanj13100 » Thu Mar 28, 2019 6:09 pm

The file is a.msi extension. It's sitted in my download files.
do I need to create a file in the flowcode folder and put it in there???

kersing
Valued Contributor
Valued Contributor
Posts: 1873
Joined: Wed Aug 27, 2008 10:31 pm
Location: Netherlands
Has thanked: 530 times
Been thanked: 1040 times
Contact:

Re: Toolchain flowcode 8

Postby kersing » Thu Mar 28, 2019 6:24 pm

You need to run the file. Msi files are installation packages.
“Integrity is doing the right thing, even when no one is watching.”

― C.S. Lewis

User avatar
medelec35
Valued Contributor
Valued Contributor
Posts: 8415
Joined: Sat May 05, 2007 2:27 pm
Location: Northamptonshire, UK
Has thanked: 2401 times
Been thanked: 3435 times
Contact:

Re: Toolchain flowcode 8

Postby medelec35 » Thu Mar 28, 2019 6:25 pm

Hi Alanj13100,
Alanj13100 wrote:do I need to create a file in the flowcode folder and put it in there???

No, a msi file can be treated the same as .exe
Just right click on it and select install or double click it.
Edit.. crossed post with kersing.
Martin

If you read a post that is useful, please show appreciation by clicking on thumbs up Icon.