Hello All,
I am not sure if I am writing in correct group but I hope that someone from Matrix can help us. We are using PIC16F1513 IC in our design and now we have purchased Flowcode to program this chip, but now I was not able to find it in supported devices list. I remember that in the version Flowcode 5 and 6 there was workaround to add new chips. For Flowcode 8 I was not able to find such guidelines or example how to add this chip in supported list.
Orbel
Adding new Chips to Flowcode 8
Moderator: Benj
-
- Flowcode V4 User
- Posts: 10
- Joined: Sat Jan 07, 2012 7:26 pm
- Has thanked: 1 time
- Been thanked: 1 time
- Contact:
- Benj
- Matrix Staff
- Posts: 15312
- Joined: Mon Oct 16, 2006 10:48 am
- Location: Matrix TS Ltd
- Has thanked: 4803 times
- Been thanked: 4314 times
- Contact:
Re: Adding new Chips to Flowcode 8
Hello Orbel,
I'll have a look at this this afternoon and see if I can get it added for you. The compiler supports it so hopefully shouldn't be too bad.
I'll have a look at this this afternoon and see if I can get it added for you. The compiler supports it so hopefully shouldn't be too bad.
Regards Ben Rowland - MatrixTSL
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
-
- Flowcode V4 User
- Posts: 10
- Joined: Sat Jan 07, 2012 7:26 pm
- Has thanked: 1 time
- Been thanked: 1 time
- Contact:
Re: Adding new Chips to Flowcode 8
Hello Ben,
Thank you for your prompt reply. Appreciate your time and effort to support us.
We will wait for your reply.
Orbel
Thank you for your prompt reply. Appreciate your time and effort to support us.
We will wait for your reply.
Orbel
- Benj
- Matrix Staff
- Posts: 15312
- Joined: Mon Oct 16, 2006 10:48 am
- Location: Matrix TS Ltd
- Has thanked: 4803 times
- Been thanked: 4314 times
- Contact:
Re: Adding new Chips to Flowcode 8
Hello Orbel,
Sorry for the delay I've now added these devices into the v8 update system.
Let me know how you get on.
Sorry for the delay I've now added these devices into the v8 update system.
Let me know how you get on.
Regards Ben Rowland - MatrixTSL
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
-
- Flowcode V4 User
- Posts: 10
- Joined: Sat Jan 07, 2012 7:26 pm
- Has thanked: 1 time
- Been thanked: 1 time
- Contact:
Re: Adding new Chips to Flowcode 8
Hello Ben,
Great, thanks a lot, already updated and using. So far no problem.
Greatly appreciate your help.
Orbel
Great, thanks a lot, already updated and using. So far no problem.
Greatly appreciate your help.
Orbel