can dsp lib working on arduino uno board?
Moderator: Benj
-
- Posts: 6
- Joined: Tue Sep 18, 2018 8:21 am
- Has thanked: 1 time
- Been thanked: 1 time
- Contact:
can dsp lib working on arduino uno board?
I'm trying to modify the example code of DSP FFT to running on Arduino. the sample code is working well under simulation. but when i download into actual board. the result calculated is always zero. is it the dsp lib only support dspic or STM32 4XX series?
- Benj
- Matrix Staff
- Posts: 15312
- Joined: Mon Oct 16, 2006 10:48 am
- Location: Matrix TS Ltd
- Has thanked: 4803 times
- Been thanked: 4314 times
- Contact:
Re: can dsp lib working on arduino uno board?
Hello,
The DSP components don't need anything special and should work fine with any chip family.
Please can you post your project file and I will investigate for you why it isn't working.
The DSP components don't need anything special and should work fine with any chip family.
Please can you post your project file and I will investigate for you why it isn't working.
Regards Ben Rowland - MatrixTSL
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
-
- Posts: 6
- Joined: Tue Sep 18, 2018 8:21 am
- Has thanked: 1 time
- Been thanked: 1 time
- Contact:
Re: can dsp lib working on arduino uno board?
please help to check this project attached.
Thanks!
Ken
Thanks!
Ken
- Attachments
-
- FFT_Test(avr)_3.fcfx
- (23.81 KiB) Downloaded 189 times
- Benj
- Matrix Staff
- Posts: 15312
- Joined: Mon Oct 16, 2006 10:48 am
- Location: Matrix TS Ltd
- Has thanked: 4803 times
- Been thanked: 4314 times
- Contact:
Re: can dsp lib working on arduino uno board?
Hi Ken,
Can't see anything major though I did spot this in the FFT component properties.
Can't see anything major though I did spot this in the FFT component properties.
Regards Ben Rowland - MatrixTSL
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
-
- Posts: 6
- Joined: Tue Sep 18, 2018 8:21 am
- Has thanked: 1 time
- Been thanked: 1 time
- Contact:
Re: can dsp lib working on arduino uno board?
Sorry, I attached the wrong file, please check this one.
- Attachments
-
- FFT_Test(avr)_3OCT.fcfx
- (23.25 KiB) Downloaded 171 times