Grove SHT31 Temp & Humidity Sensor

For Flowcode users to discuss projects, flowcharts, and any other issues related to Flowcode 8.

Moderator: Benj

Post Reply
poohbear
Posts: 26
Joined: Sat Apr 01, 2017 6:32 pm
Has thanked: 1 time
Been thanked: 8 times
Contact:

Grove SHT31 Temp & Humidity Sensor

Post by poohbear »

Hi
Can any one help please. trying to connect the above to a BL0080 with a 16F18877 PIC. Using the Grove sensor board. I am using ports A & B for the combi board and plugging the sensor board into port C. The problem is that I can't figure out which pins to connect the SCL & SDA to. My first choice were port C pins 3 & 4 but tried these using software, channel 1 and channel 2. Still won't work.

Got it working in simulation but that is with the GUI

Thanks

Gary

User avatar
Benj
Matrix Staff
Posts: 15312
Joined: Mon Oct 16, 2006 10:48 am
Location: Matrix TS Ltd
Has thanked: 4803 times
Been thanked: 4314 times
Contact:

Re: Grove SHT31 Temp & Humidity Sensor

Post by Benj »

Hi Gary,

It depends on which port on the Grove board you connected the sensor to. Each socket should be marked with two numbers e.g. 0&1 or 2&3. The SDA pin connects to the odd pin and the SCL to the even pin. e.g. SCL = C2 / SDA = C3.

We have recently found a problem with this component which has now been fixed. Use the Help -> Check for updates system to get the latest version of the component.

Let us know how you get on.

poohbear
Posts: 26
Joined: Sat Apr 01, 2017 6:32 pm
Has thanked: 1 time
Been thanked: 8 times
Contact:

Re: Grove SHT31 Temp & Humidity Sensor

Post by poohbear »

Hi Ben
I'm a little busy at the moment, will let you know how it goes when I get a few minutes

Gary

poohbear
Posts: 26
Joined: Sat Apr 01, 2017 6:32 pm
Has thanked: 1 time
Been thanked: 8 times
Contact:

Re: Grove SHT31 Temp & Humidity Sensor

Post by poohbear »

Hi Ben
Just a quick update. I got the sensor working OK, thanks for the help

Gary

Post Reply