Hello
since the "Symbols - Toolbar" can not be moved and therefore the clarity is strongly reduced - between properties and flowcode area the "Symbols - Toolbar" was squeezed - I decided not to buy SCADA.
So my question is how can I undo the installation on Flowcode 8.1?
In other words, how can I downgrade from Flowcode 8.1 to 8.0?
change from Flowcode 8.1 to Flowcode 8.0
Moderator: Benj
-
- Posts: 89
- Joined: Wed Aug 31, 2016 4:48 pm
- Been thanked: 4 times
- Contact:
-
- Matrix Staff
- Posts: 9520
- Joined: Sat May 05, 2007 2:27 pm
- Location: Northamptonshire, UK
- Has thanked: 2585 times
- Been thanked: 3815 times
- Contact:
Re: change from Flowcode 8.1 to Flowcode 8.0
Hi,
I don't believe V8.0 database is live anymore.
This means that V8.0 will remain out of date.
I don't believe its worth doing over a non moveable toolbar.
That's just my opinion of course.
Don't forget Daniel did state:
At least then a toolbar can be moved then locked back into place.
That should keep everyone happy?
I don't believe V8.0 database is live anymore.
This means that V8.0 will remain out of date.
I don't believe its worth doing over a non moveable toolbar.
That's just my opinion of course.
Don't forget Daniel did state:
If there is an issue with toolbars being accidentally moved, then there should be a right click option of lock/unlock toolbars.DanielM wrote: At the moment, the toolbar cannot be moved manually. (though this is something we are considering adding back in the future: especially if users such as yourself really want that functionality).
At least then a toolbar can be moved then locked back into place.
That should keep everyone happy?
Martin
-
- Posts: 62
- Joined: Mon Oct 23, 2017 9:54 am
- Has thanked: 11 times
- Been thanked: 22 times
- Contact:
Re: change from Flowcode 8.1 to Flowcode 8.0
Hi both.
The next patch will contain an option to use the icon toolbars in the old style: i.e. a single floatable global icon toolbar (as opposed to the new method of a toolbar per programming view).
Regards.
Daniel
The next patch will contain an option to use the icon toolbars in the old style: i.e. a single floatable global icon toolbar (as opposed to the new method of a toolbar per programming view).
Regards.
Daniel