CAN Bus for STM32F303VCT6 and STM32F series

For Flowcode users to discuss projects, flowcharts, and any other issues related to Flowcode 8.

Moderator: Benj

Post Reply
karthickefy
Posts: 74
Joined: Thu Nov 30, 2017 3:21 am
Has thanked: 4 times
Been thanked: 9 times
Contact:

CAN Bus for STM32F303VCT6 and STM32F series

Post by karthickefy »

Hi Benj,
Currently I'm working with STM32F303VCT6 ARM Application Board. I would like to communicate this ARM processor with CAN Communication (As per our customer specification). As per ST datasheet, STM32F303VCT6 part can support the CAN communication (2 CAN). But in Flowcode 8 doesn't have the internal CAN bus option for this part. Please help to enable the internal CAN option with STM32F303VCT6 ARM Chip. Our application board has the CAN driver IC (IFX1050GVIO) which is connected with STM32F303VCT6 Chip (CAN RX connected with Pin 81 (PD0) and CAN TX connected with pin 82 (PD1)). Please advice.

Thanks,
Karthick.

User avatar
celebriums
Posts: 125
Joined: Sun Sep 25, 2016 3:50 pm
Has thanked: 71 times
Been thanked: 33 times
Contact:

Re: CAN Bus for STM32F303VCT6 and STM32F series

Post by celebriums »

Hi karthickefy

I read somewhere in the forum. Flowcode 7 can be on forums, Normal also supports STM32 CANBUS, but FLOWCODE will not support.

Flowcode, STM32 and CANBUS has yet to improve itself. I'm suffering from the same thing.
Sincerely Regards
Sadık SUME

www.kaandesign.com.tr

Post Reply