Ghost error massage
Moderator: Benj
-
- Posts: 164
- Joined: Fri Jan 13, 2012 4:21 am
- Location: South KOREA
- Has thanked: 18 times
- Been thanked: 16 times
- Contact:
Ghost error massage
What should I do if I get this message?
- Attachments
-
- Capture.png
- (125.04 KiB) Downloaded 1091 times
- Benj
- Matrix Staff
- Posts: 15312
- Joined: Mon Oct 16, 2006 10:48 am
- Location: Matrix TS Ltd
- Has thanked: 4803 times
- Been thanked: 4314 times
- Contact:
Re: Ghost error massage
Hello,
I've not seen that error before. Does it always happen or has it been working ok previously.
What hardware are you using?
I've not seen that error before. Does it always happen or has it been working ok previously.
What hardware are you using?
Regards Ben Rowland - MatrixTSL
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
-
- Posts: 164
- Joined: Fri Jan 13, 2012 4:21 am
- Location: South KOREA
- Has thanked: 18 times
- Been thanked: 16 times
- Contact:
Re: Ghost error massage
formatted the PC. Previously it was used as e-block1.
Use e-block2 for the first time.
Use the PIC16F18877.
This phenomenon occurs continuously.
Use e-block2 for the first time.
Use the PIC16F18877.
This phenomenon occurs continuously.
- Benj
- Matrix Staff
- Posts: 15312
- Joined: Mon Oct 16, 2006 10:48 am
- Location: Matrix TS Ltd
- Has thanked: 4803 times
- Been thanked: 4314 times
- Contact:
Re: Ghost error massage
It appears that the file has been programmed onto the E-block 2 board. Is the program running?
We are investigating the issue for you.
We are investigating the issue for you.
Regards Ben Rowland - MatrixTSL
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
- Benj
- Matrix Staff
- Posts: 15312
- Joined: Mon Oct 16, 2006 10:48 am
- Location: Matrix TS Ltd
- Has thanked: 4803 times
- Been thanked: 4314 times
- Contact:
Re: Ghost error massage
Hello,
Have you tried compiling a very simple program such as a 1 second flasher to double check if the device is being programmed correctly as it is reporting.
Can you post your program so we can double check there is nothing wrong there.
Other then this it looks to be something to do with the Windows locale. Maybe try setting this to English and see if this solves the problem.
Have you tried compiling a very simple program such as a 1 second flasher to double check if the device is being programmed correctly as it is reporting.
Can you post your program so we can double check there is nothing wrong there.
Other then this it looks to be something to do with the Windows locale. Maybe try setting this to English and see if this solves the problem.
Regards Ben Rowland - MatrixTSL
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel