Ghost stream decode

For Flowcode users to discuss projects, flowcharts, and any other issues related to Flowcode 8.

Moderator: Benj

Post Reply
stefan.erni
Valued Contributor
Valued Contributor
Posts: 654
Joined: Fri Aug 19, 2016 2:09 pm
Location: switzerland
Has thanked: 182 times
Been thanked: 179 times
Contact:
Contact stefan.erni

Ghost stream decode

Post by stefan.erni »

Hi Ben

I connected the Flowkit V2 to my hardware. I just solderd a connetor to the pin's from the PIC and connect it with the Flowkit.
Then I wrote a simple program with a SPI Master like in my hardware and let it run.
The Data Recorder show the signal but how can I decode the stream? And it does not show me the clock from the SPI even the (my) osciloscope show the signal on the pin from the Flowkit V2.


Flowkit_connect1.jpg
Flowkit_connect1.jpg (155.64 KiB) Viewed 3945 times
DataRecorder.PNG
(69.46 KiB) Downloaded 1330 times
ghost Option.PNG
(18.91 KiB) Downloaded 1330 times
Top
Post Reply

Return to “Flowcode V8”