Formula Flowcode buggy error on programming in FF8

For Flowcode users to discuss projects, flowcharts, and any other issues related to Flowcode 8.

Moderator: Benj

koenvg
Posts: 3
Joined: Tue Oct 01, 2019 9:45 am
Contact:

Formula Flowcode buggy error on programming in FF8

Postby koenvg » Tue Oct 01, 2019 9:59 am

Flowcode mLoader is showing an error on programming the Formule Flowcode Buggy in Flowcode 8.2.
The laptops used for programming are running Windows 10 1903 Pro Education. Drivers are installed, device management shows the Formula Flowcode buggy.
Attachments
image.png
image.png (47.38 KiB) Viewed 422 times
image (1).png
image (1).png (29.71 KiB) Viewed 422 times

User avatar
Benj
Matrix Staff
Posts: 14375
Joined: Mon Oct 16, 2006 10:48 am
Location: Matrix TS Ltd
Has thanked: 4448 times
Been thanked: 4151 times
Contact:

Re: Formula Flowcode buggy error on programming in FF8

Postby Benj » Mon Oct 07, 2019 5:27 pm

Hello,

I've just tested this and it's working fine here. Can you send us your Flowcode project file and I will investigate what the cause might be.

koenvg
Posts: 3
Joined: Tue Oct 01, 2019 9:45 am
Contact:

Re: Formula Flowcode buggy error on programming in FF8

Postby koenvg » Tue Oct 08, 2019 8:45 am

Project is attached to this message.
Same project on windows 10 lstb 2016 is working fine.
Attachments
Flowcode1.fcfx
(5.91 KiB) Downloaded 16 times

User avatar
Benj
Matrix Staff
Posts: 14375
Joined: Mon Oct 16, 2006 10:48 am
Location: Matrix TS Ltd
Has thanked: 4448 times
Been thanked: 4151 times
Contact:

Re: Formula Flowcode buggy error on programming in FF8

Postby Benj » Tue Oct 08, 2019 9:47 am

Hello,

Project looks fine and as it's working fine on another PC I can only assume it's down to the version of Windows. Are there updates you can apply to bring the Windows installation up to date?

The invalid CSV file warning is interesting. I'll see if I can work out what might be causing this.

As a side test you could try manually programming the Flowcode hex file using the BuggyProg software located within the Flowcode 8 installation.

Usually C:\Program Files (x86)\Flowcode 8\tools\Buggyprog\BuggyProg.exe

Let us know how you get on.

koenvg
Posts: 3
Joined: Tue Oct 01, 2019 9:45 am
Contact:

Re: Formula Flowcode buggy error on programming in FF8

Postby koenvg » Tue Oct 08, 2019 12:45 pm

The program BuggyProg sends the hex file without any problem, but the program is not executed on the buggy.

The program mLoader works fine on a windows 1903 Home edition and the hex is executed correctly on the buggy.

The program mLoader is nog working on a windows 1903 Pro education laptop.