Flow code Broken with win10 pro v1909

For Flowcode users to discuss projects, flowcharts, and any other issues related to Flowcode 8.

Moderator: Benj

Post Reply
astro1234
Posts: 50
Joined: Mon Apr 10, 2017 12:53 pm
Has thanked: 39 times
Been thanked: 13 times
Contact:

Flow code Broken with win10 pro v1909

Post by astro1234 »

Is Flowcode v8.2.1.1.14 broken with win 10 pro v1909 ?.
Today i upgraded both of my computers to the latest win 10,
now i find that flow code v8 will not run some of my files.
All LCD showing half a screen only,
slider missing top half of the numbers.
Slider will not move when running at normal speed.
All was working OK before the upgrades.
Does flow code need a update, to get things going again ?.
Regards Roy.
Attachments
Capture.PNG
(45.78 KiB) Downloaded 417 times

User avatar
tiny
Posts: 200
Joined: Wed Jul 08, 2009 8:29 am
Has thanked: 51 times
Been thanked: 93 times
Contact:

Re: Flow code Broken with win10 pro v1909

Post by tiny »

Hello Roy
I also have Flowcode 8.2.1.13 running under Windows 10 Pro Build 1909 and more smoothly than under previous build (1903).
I do not know the described problem after the update to build 1909, but before you reinstall Flowcode, try the note below

viewtopic.php?f=78&t=21531&start=25

Maybe reinitializing Flowcode can fix this problem.
Regards
Christina

User avatar
Benj
Matrix Staff
Posts: 15312
Joined: Mon Oct 16, 2006 10:48 am
Location: Matrix TS Ltd
Has thanked: 4803 times
Been thanked: 4314 times
Contact:

Re: Flow code Broken with win10 pro v1909

Post by Benj »

Hello,

Please open Flowcode and load your project. Then click View and Global Options.

In the Application tab change the Graphics engine from OpenGL Software to OpenG Hardware.

The software mode was incorrectly set to be the default for the latest version which has a very limited texture buffer and hence only half the textures are showing.

astro1234
Posts: 50
Joined: Mon Apr 10, 2017 12:53 pm
Has thanked: 39 times
Been thanked: 13 times
Contact:

Re: Flow code Broken with win10 pro v1909

Post by astro1234 »

Thank you Benj,that sorted it out,now all working.
Regards Roy.

Post Reply