I would like to be able to enter a rotation angle rather than drag a component or object by 45 or 90 degrees for example.
If not used rotating objects than rotation can be a bit of a pain.
Add Rotate for 2D and 3D panels [Resolved]
Moderator: Benj
-
- Matrix Staff
- Posts: 9520
- Joined: Sat May 05, 2007 2:27 pm
- Location: Northamptonshire, UK
- Has thanked: 2585 times
- Been thanked: 3815 times
- Contact:
-
- Posts: 198
- Joined: Sun Nov 04, 2018 7:13 pm
- Has thanked: 27 times
- Been thanked: 33 times
- Contact:
Re: Add Rotate for 2D and 3D panels
Can't you already do that? Select a component, in properties>position the x,y,z rotation?
Maybe I am missing something..
chad
Maybe I am missing something..
chad
-
- Matrix Staff
- Posts: 9520
- Joined: Sat May 05, 2007 2:27 pm
- Location: Northamptonshire, UK
- Has thanked: 2585 times
- Been thanked: 3815 times
- Contact:
Re: Add Rotate for 2D and 3D panels
Hi Chad,
Thank you for your reply.
I had totally forgotten I can do that.
I'm not a 3D person so don't normally require rotating components (Except for the occasional drag and rotate).
3D is a great feature, so need to get into it more.
Thank you for your reply.
I had totally forgotten I can do that.
I'm not a 3D person so don't normally require rotating components (Except for the occasional drag and rotate).
3D is a great feature, so need to get into it more.
Martin