Hi Ben,
I have been doing some more testing on the BL0136 component...
In addition to the simulation issue that I described in a previous post viewtopic.php?f=78&t=20260, I found another odd problem.
When requesting the IP address using the CheckTCPServerIP macro on the hardware it returns the MAC address rather than the expected IP address. The odd thing I observed is that when simulating in ICD mode both the hardware and the simulation shows the correct IP addres s - this is on the LCD display and simulation debugger panel.
Test program attached
Best
Pete
BL0136 - Component issue
Moderator: Benj
- Benj
- Matrix Staff
- Posts: 15312
- Joined: Mon Oct 16, 2006 10:48 am
- Location: Matrix TS Ltd
- Has thanked: 4803 times
- Been thanked: 4314 times
- Contact:
Re: BL0136 - Component issue
Hi Pete,
Hmm same for me, I'll look into this for you.
Edit .. Should be fixed now.
Hmm same for me, I'll look into this for you.
Edit .. Should be fixed now.
Regards Ben Rowland - MatrixTSL
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
- petesmart
- Valued Contributor
- Posts: 395
- Joined: Thu May 06, 2010 11:42 am
- Location: Sydney, Australia
- Has thanked: 187 times
- Been thanked: 140 times
- Contact:
Re: BL0136 - Component issue
Hi Ben,
Component now doing as it should... thanks.
Please see previous topic - simulation is still broken...
Best
Pete
Component now doing as it should... thanks.
Please see previous topic - simulation is still broken...
Best
Pete
sorry about that Chief!
- petesmart
- Valued Contributor
- Posts: 395
- Joined: Thu May 06, 2010 11:42 am
- Location: Sydney, Australia
- Has thanked: 187 times
- Been thanked: 140 times
- Contact:
Re: BL0136 - Component issue
We are getting closer Ben,
I have sent you a PM wit the details
best
Pete
I have sent you a PM wit the details
best
Pete
sorry about that Chief!