Cannot download to Flowcode Buggy
Moderator: Benj
Cannot download to Flowcode Buggy
We recently installed FC8 and all seems to work ok but the download to the FC Buggy fails. The two Buggy LEDs flash as expected suggesting the USB drivers are correctly installed but mLoader reports no target device attached even after the Buggy is reset. I ran the Buggyprog application from the FC8 Tools folder to check whether the Buggy is correctly connected and all reports OK. I'm not sure what else to try so any suggestions how to resolve this issue would be gratefully received.
- Benj
- Matrix Staff
- Posts: 15312
- Joined: Mon Oct 16, 2006 10:48 am
- Location: Matrix TS Ltd
- Has thanked: 4803 times
- Been thanked: 4314 times
- Contact:
Re: Cannot download to Flowcode Buggy
Hello,
Please can you post your Flowcode project, it may be there is something simple like you have the raw PIC IC selected as your target rather than the specific robot definition file available from the Misc category.
Please can you post your Flowcode project, it may be there is something simple like you have the raw PIC IC selected as your target rather than the specific robot definition file available from the Misc category.
Regards Ben Rowland - MatrixTSL
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel