Hi everyone
I'm trying to make a program with this mcu PIC32MM0064GPL020 , but at the time of compilation it returns the following error:
xc32-gcc.exe: fatal error: selected multilib 'micromips' not installed;C: Program Files (x86) Flowcode Common Compilers x32 bin xc32 - gcc.exe reported error code 255
Another thing I can't disable the code protection from the menu
Attached is the test program that is simply a led that turns on and off
Best Regards
pic32mm compiler problem
Moderator: Benj
- Benj
- Matrix Staff
- Posts: 15312
- Joined: Mon Oct 16, 2006 10:48 am
- Location: Matrix TS Ltd
- Has thanked: 4803 times
- Been thanked: 4314 times
- Contact:
Re: pic32mm compiler problem
Hello,
I've fixed the configuration problem now so that you can change the code protect flag. In fixing the configuration this also seems to have fixed the compilation error.
Let me know how you get on.
I've fixed the configuration problem now so that you can change the code protect flag. In fixing the configuration this also seems to have fixed the compilation error.
Let me know how you get on.
Regards Ben Rowland - MatrixTSL
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
-
- Posts: 143
- Joined: Mon Aug 20, 2018 11:04 am
- Has thanked: 42 times
- Been thanked: 41 times
- Contact:
Re: pic32mm compiler problem
Dear Benj
With the new release I managed to compile correctly.
I'm checking the operation of the pins and everything looks OK
In the coming days I will use some components to test the new board and I'll let you know the result.
Thanks again for the quick support
With the new release I managed to compile correctly.
I'm checking the operation of the pins and everything looks OK
In the coming days I will use some components to test the new board and I'll let you know the result.
Thanks again for the quick support
- celebriums
- Posts: 125
- Joined: Sun Sep 25, 2016 3:50 pm
- Has thanked: 71 times
- Been thanked: 33 times
- Contact:
Re: pic32mm compiler problem
Dear Benj
I hope you are fine and Be careful with the Corona virus.
I don't think the compiler problem has been solved. I was thinking about doing a project with this processor. I think I'm going to give up.
I hope you are fine and Be careful with the Corona virus.
I don't think the compiler problem has been solved. I was thinking about doing a project with this processor. I think I'm going to give up.
- Attachments
-
- PowerNoise.fcfx
- (7.09 KiB) Downloaded 167 times
- QMESAR
- Valued Contributor
- Posts: 1287
- Joined: Sun Oct 05, 2014 3:20 pm
- Location: Russia
- Has thanked: 384 times
- Been thanked: 614 times
- Contact:
Re: pic32mm compiler problem
Hi .
In my opinion it is not an Compiler problem but and definition file error
In my opinion it is not an Compiler problem but and definition file error
https://www.flowcodexchange.com/
Regards QMESAR
Regards QMESAR
- Benj
- Matrix Staff
- Posts: 15312
- Joined: Mon Oct 16, 2006 10:48 am
- Location: Matrix TS Ltd
- Has thanked: 4803 times
- Been thanked: 4314 times
- Contact:
Re: pic32mm compiler problem
Hello,
Many thanks and to you. I'll look into these issues for you and hopefully provide you with a fix. These are new devices for us and there are usually some teething issues with certain peripherals on new devices. Hopefully nothing too major.Dear Benj
I hope you are fine and Be careful with the Corona virus.
Regards Ben Rowland - MatrixTSL
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel