Programmer Error

Forum for problems or queries regarding the Flowcode application and compiler usage.

Moderators: Benj, Mods

Posts: 11
Joined: Wed Dec 10, 2008 7:42 pm

Programmer Error

Postby spence » Fri Jan 16, 2009 2:53 pm


I have a programmer that has been used to burn 2 chips It no longer works for some reason says No USB connection (slot0)

Cable and ports are both fine any ideas


User avatar
Matrix Staff
Posts: 14574
Joined: Mon Oct 16, 2006 10:48 am
Location: Matrix TS Ltd
Has thanked: 4602 times
Been thanked: 4240 times

Re: Programmer Error

Postby Benj » Fri Jan 16, 2009 4:06 pm

Hello Spence

Is it our hardware your using. Have you tried the USB power management workaround detailed here. ... .php?t=509

Also make sure that the jumper settings are still correct. Eg USB/PSU jumper set to PSU and USB/ICD jumper set to USB.

If none of the above works then is the device showing up in device manager and also is the orange LED lighting when the USB is plugged in.